We dispose sets of natural beech pieces in various sizes: 45mm to 100mm wide and 25mm to 120mm long. Useful pieces for the furniture industry, especially cabinetmaking, as well as carpentry. We sell them in impeccably ordered pallets and the price of the batch will depend on the pieces per pallet.
Any wood that will be used in direct contact with wet or fresh permanently humid ground must be treated in autoclave level IV. This is the case of the wood used for pergolas, fences, roofs, beach floors or stands. In MAJOFESA we have Scots pine brushed wood prevented with water-soluble salts Wolmanit® CX. Thus the risk of rotting by fungi and wood-eating insects attack is reduced. The thickness of these pieces can be 22mm, 45mm, 70mm, 90mm, 120mm or 140mm; the width can be 95mm, 145mm or 195mm; and the length varies between 4 and 6 meters.
We have custom parts for KKK rolled profiles of pine wood. They are complete pieces of finished material and 4 sides clean of knots, with fingers for use mainly in building windows.
Wooden planks of radiata pine wood are also sold complete, finished and 4 sides clean of knots, but spliced without laminate. Used primarily for cabinetmaking work or for manufacturing of moldings.
Our wooden platforms of Sweden pine wood are sold finished, but untreated. Usually they have about 22mm of thickness and they are mainly used for building tongued, wooden structures, walls, decks, pergolas, attics, ceilings and floors, among other applications.